How do I use the Remote Management feature on my router?(by Anson)

Step 1: Log into the web based configuration of the router by typing in the IP address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing).

Step 2: Click the Advanced tab and click the SECURITY SETTING tab and Miscellaneous button.

Step 3: Select the Enabled button to enable Remote Administrator. In the IP Address field type in the public IP address and Port you wish to manage the router.

Note: If you don´t know the IP address or wish to allow more than one IP address to manage the router then put an asterisk (*) in the IP Address field. You cannot enter an IP range.

Step 4: By default, the port used to Remote Manage the router is set to 8080. Change the port number by selecting the down arrow next to the Port Number drop down menu.

Step 5 Click on save button to save the changes.



To Remote Manage the router you will need to type in the Public IP Address of the router in your web browser along with the Port Number (separated by a colon) you selected in Step 4.

Example: 192.168.122.77:8080